Moisture of Solid/Powder, Slurries, Foliages

moisture content, Moisture content Test, Moisture content detect, Moisture content measure, Moisture content measurement, Moisture content analysis, content monitor, Moisture content gauge, Moisture content cut, Moisture content Meter, Moisture content instrument, Moisture content  analyzer, Moisture content Moisture content transducer, Moisture content transmitter, Moisture content alarm, Moisture content detector, Water activity, Water activity Test, Water activity detect, Water activity measure, Water activity measurement, Water activity analysis, Water activity analyser, Water activity analyze, Water activity monitor, Water activity gauge, Water activity cut, Water activity Meter, Water activity instrument, Water activity analyzer, nWater activity transducer, Water activity transmitter, Water activity alarm, Water activity detector, Water percentage, Water percentage Test, Water percentage detect, Water percentage measure, Water percentage measurement, Water percentage analysis, Water percentage analyser, Water percentage analyzer, Water percentage monitor, Water percentage gauge, Water percentage cut, Water percentage Meter, Water percentage instrument, Water percentage analyzer, Water percentage transducer, Water percentage transmitter, Water percentage alarm, Water percentage detector,

Application Guide for Moisture Analysis of Solids and Powder Materials

Handheld  sMS1204 series Powder Moisture Teller        [Introduction]  [Datasheet] H-BD5sMS1204 Moisture Meter for Solid Powder RF attenuation. Special designed for powder material application. Suitable to test moisture of Ceramics and earth, Chemicals, Cements, Coal, Corn&Grain, Cotton, Fermentation Products, Fertilizer, Foods processing Particles, Glass materials, Mineral powder, particle Polymers, Pharmaceuticals, particle Resins, particle Dyes, Sands,Soil,Solid lubricants,  and other powder chemicals. Type Application Samples Range LDL Accuracy Sample temperature H-MS1204poke Dia... 0.5 to 10mm.Powder, grain, particle (meshes to f 10mm), colloid, thick fluid, truss etc. 0-100% 0.1 ± 1.0%FS 0-100℃ H-MS1204paw Dia.. 0.5to 6mm.Powder, grain, particle, colloid, thick fluid, truss, lump, block, chunk, etc. 0-100% 0.1 ± 1.0%FS 0-100℃ H-MS1204Spoon Dia.. 1-4mm Grain, Particle with a sampling spoon 0-40% 0.1 ± 1.0%FS 0-100℃ H-MS1204Disc powder and lose samples with density compensation by press 0-40% 0.1 ± 1.0%FS 0-100℃ H-MS1204F Wood, plate materials. Surface detect to 1cm deep 0-40% 0.1 ± 0.5%FS 0-100℃ H-MS1204N Needle alike, used to hard solids. to test when inserted, for soil etc. 0-40% 0.1 ± 0.5%FS 0-100℃ H-MS2100 Moisture&water activity Analyzer   [Introduction]  [Datasheet] H-MS2100Wa   Water activity hygrometer The active part of moisture content and, therefore, water activity, provide better information than the total moisture content regarding the micro-biological, chemical and enzymatic stability of perishable products such as foods and seeds. For similar reasons, water activity is equally relevant in the pharmaceutical industry where it provides useful information regarding the cohesion of tablets and pills, or the adherence of coatings. Water activity can be directly compared with the relative humidity of the ambient air to prevent dimensional changes in a product (paper, photographic film), to prevent hygroscopic powders (powdered sugar, salt) from caking or turning into a solid block, etc Water activity can be used with some products (mostly synthetic products) as a means of indirectly measuring the total moisture content. This requires developing sorption isotherms to this purpose. Sorption isotherms are graphs that provide the relationship between water activity and moisture content at constant temperature. For most natural products, repeatable sorption isotherms cannot be reliably developed and water activity should be regarded as separate from moisture content. Series accessories  completes H-MS2100Wa of versatile utility to test gas, liquids, and solids with one analyzer. Specifications Aw Range: 0.03-1.00 Moisture Range:100ppm to 100% Accuracy: 0.015Aw (<+/-0.3°C, at room temperature ) Repeatability:< 0.005 Aw (<0.1°C, at room temperature) Temperature: -20 to 85°C; -50 to 200°C Instrument environ: -10 to 60°C； 0-99%RH Battery supply 3 mode to test:  SMART: accelerated water activity measurement with automatic end of measurement. NORMAL: conventional water activity measurement with automatic detection of equilibrium and automatic end of measurement STANDARD: water activity and temperature measurement, limited to just indicating the values and the trend of the values Test time: 2~5 min Typical at Smart: H-MS4810DRS-NIR Moisture Analyzer   [Introduction]  [Datasheet] High resolution and selective moisture analyzer, both for solids and liquids Features Instant Measurement Non-Contact Non-Destructive Versatile usage Application Chemicals, Ink Pulp/Paper  Pharmaceuticals Food, Beverages and Dairy Agriculture Grain, soil, woods, fruits, Greenstuffs Cement and other materials Cosmetics and Beauty Products Lubricant Oils, machine oils, fuel oils Plastics, polymers

Humidity / Dew Point / Gas Moisture

Humidity, Humidity Test, detect, Humidity measure, Humidity measurement, Humidity analysis, Humidity analyse, Humidity analyze, Humidity monitor, Humidity gauge, Humidity cut, Humidity Meter, Humidity instrument, Humidity analyzer, Humidity transducer, Humidity transmitter, Humidity alarm, Humidity detector, Dew point, Dew point Test, Dew point detect, Dew point measure, Dew point measurement, Dew point analysis, Dew point analyse, Dew point analyze, Dew point monitor, Dew point gauge, Dew point cut, Dew point Meter, Dew point instrument, Dew point analyzer, Dew point transducer, Dew point transmitter, Dew point alarm, Dew point detector,

Application Guide for Moisture Analysis of Gases

　

Handheld gMS2100 Gas Moisture Analyzer      [Introduction] [  [Datasheet]

All Humidity Parameters from One Instrument Absolute moisture, Volume ratio, Partial pressure, Saturation moisture, Relative humidity, Specific quantity, Dew point, Water content/moisture, and temperature And Pressure Test for compensation under process conditions Ideal for Laboratory and Quality Control in the Industrial Production Specially Powerful for Scientific Convert Applications RH, AH, Dew Point smart test in Laboratory and filed Moisture in compressed air Humidity of refrigerant and desiccant dryers Heating, ventilation and air conditioning Dry process monitoring Chemical industry Production quality management